DWGAL-09
Carbon Fibre Aero Parts
HyTech Racing is Georgia Tech's Formula SAE Electric team. I work on aerodynamics and make the carbon fibre parts by hand, from the mould to the finished part.
Role
Aerodynamics and composites
When
August 2026 to present
Tools
SolidWorksANSYS CFDCATIA 3DEXPERIENCE FEACarbon fibre layupVacuum infusionMould making
+8%Front wing aero efficiency
+5%Downforce
−3%Drag
Aerodynamics
- Designed and tested front wing revisions in SolidWorks.
- Ran ANSYS CFD with mesh studies on each revision, so a change in the numbers came from the design and not from the mesh.
TRY ITMove your pointer up and down to tilt the wing. Push it too far and it stalls.
Composites
- Designed and made the moulds for the front wing, floor and battery accumulator parts from CAD.
- Laid up the carbon fibre by hand, then vacuum infused and cured each part. I've also done wet layup.
- Checked the structures under in-service loads with FEA in CATIA 3DEXPERIENCE.