DWGAL-10
Injectors and Regenerative Cooling
Engine development on the Yellow Jacket Space Program. I work on the injector, the feed system and the regenerative cooling for Felicette II, the team's first regen-cooled engine.
Role
Engine development engineer
When
August 2026 to present
Tools
Fusion 360GD&TANSYS CFDPythonNESS (regen cooling code)
~5,000Chamber designs simulated
< 3%Fuel manifold flow maldistribution
12LOx outlets balanced
880 to 1,250 KThroat wall temperature at MR 4
Injector and manifolds
- Designed and tested an impinging injector for N₂O/IPA feeds in Fusion 360, with GD&T drawings.
- Simulated the fuel-side swirl injector manifold in ANSYS CFD and cut flow maldistribution to under 3%.
- Extended the study to the LOx-side manifold to balance flow across 12 outlets.
Can the fuel alone cool the chamber?
I ran about 5,000 regen-cooled chamber designs through the team's NESS code with a Python layer on top, modelling wall temperature, fuel boiling and pressure drop across the burn.
| Finding | Detail |
|---|---|
| No fuel-cooled design survives at a mixture ratio of 4 | Throat walls reach 880 to 1,250 K |
| A surviving design space exists | Mixture ratio near 3, a GRCop-42 liner and throat-tapered channels |
| The condition | Wall heat has to drop by about 20% |
TRY ITHold to fire. Try it at a mixture ratio of 4, then switch to 3.